Dynalink RTA1046VW ADSL2+ 4 Port W/less Router with 2x VOIP

[Product Code: 06298]
[Model No: RTA1046VW]


	Stock: Not Available

	Discounted Price: $181.70 incl. GST

Dynalink RTA1046VW ADSL2+ 4 Port W/less Router with 2x VOIP

Click to enlarge

Product Description

TheRTA1046VW is an ADSL2+ IAD (all in one Integrated Access Device) that incoporates an ADSL2+ modem, 4-port network switch, 54Mbps wireless access point and two phone ports for VoIP in one box.

It is simialr to the RTA1025W with the addition of built in VoIP capabilities. The RTA1046VW provides wireless internet and file sharing between multiple computers. With it's built in four port switch providing connections to four computers via Ethernet cable, supplying a seamless network to over 8 PC's with no other hardware required.

Included in its long list of features is an IP packet filtering firewall, WEP, WPA and WPA2 wireless encryption. Theseprovide a safe platform while providing the user with the capability to talk on the phone while surfing the internet at the same time all in one sleek and stylish unit.

Please note: you will have to arrange for a VoIP service with a provider in order to make Internet phone calls with this product.

Features:

Broadcom BCM6348 chipset solution

Broadband Internet Access up to 24 Mbps

Supports ADSL2+, ADSL2 and ADSL2

Simple Configuration

Integrated 54 Mbps Wireless Access

Fixed undetachable antenna

Wireless Security, WEP, WPA and WPA2

4 Ethernet Ports for Internet Sharing

Suitable for Home and Office Networks

Packet filtering firewall

Port forwarding, QoS to prioritise traffic and UPnP

VPN Passthrough

2 Phone ports and PSTN backup

Annex M support

Specifications:

ADSL Compliance	ADSL
	ANSI T1.413 Issue 2
	ITU G.992.1 Annex A (G.dmt)
	ITU G.992.2 Annex A (G.lite)
	ITU G.994.1 (G.hs)
	Support dying gasp
	Maximum Rate: 8 Mbps downstream and
	1 Mbps upstream
	ADSL2
	ITU G.992.3 Annex A (G.dmt)
	ITU G.992.4 Annex A (G.lite)
	Maximum Rate: 12 Mbps downstream and
	1 Mbps upstream
	ADSL2+
	ITU G.992.5 Annex A (G.dmt)
	Maximum Rate: 24 Mbps downstream and
	1.2 Mbps upstream
ATM	PPPoA (RFC 2364) and PPPoA Bridged mode
	PPPoE (RFC 2516) and PPPoE Bridged mode
	IPoA (RFC 2225)
	Bridged mode over AAL5 (RFC2684/1483)
	ATM Forum UNI 3.1 / 4.0 compliant PVCs
	UBR and CBR with trac shaping
	OAM F4/F5 loopback cells
Bridging	IEEE 802.1d self-learning bridge
	Learning up to 4096 MAC addresses
	Supports IGMP Snooping
	Supports 802.1Q VLAN packet pass-through
Voice over IP Features	Call Feature: basic outgoing and incoming
	call, Call Waiting, Three Party Conference, Call
	Transfer, Caller ID (only when supported by
	service provider).
	Call Control: SIP (RFC3261)
	Voice Transport: compliance to RTP (RFC1889)
	Voice Codec: G.711 (a-law and u-law),
	G.726 and G.729
	Tone/Ring Signal: compliance to Australia & New
	Zealand standards.
	Tone Detection: support DTMF
	Echo Cancellation: G.168 compliance
	Support FAX/Analog Modem function via
	PSTN port
	Support RFC2833 RTP Payload for DTMF Digits,
	Telephony Tones and Telephony Signals
	Two VoIP (FXS) ports for VoIP phone calls
	supporting intelligent lifeline backup when there
	is no Internet service.
	Manual selection of PSTN mode or VoIP mode for
	making phone calls
	Automatic selection of PSTN when an emergency
	number is dialled.
Routing	NAT / PAT allows multiple users to share
	Internet access
	UPnP IGD with NAT traversal capability
	Port Forwarding: users can setup multiple virtual
	servers (e.g., Web, FTP, Mail servers) on the
	local network.
	Static routing & dynamic routing RIPv1/v2
	DNS Relay, Dynamic DNS
	DHCP Client/Relay/Server
	IGMP Proxy
	Support IP/Bridge QoS for dierent trac classes
	Support 802.1Q VLAN Tagging
Configuration and Management	Embedded web conguration interface with
	password protection
	Remote management control
	Telnet session for local or remote management
	System events logging
	DSL connection diagnostics
	Firmware upgrade via web browser
	User setting backup & restore
	SNMPv1/v2 agent with MIB-II, ADSL Line MIB
Supported Applications	Application Level Gateways preset for Auth/Ident,
	DNS, FTP, PPTP, IPSEC, POP3, SMTP, SSH, TELNET,
	TFTP & WEB servers. Multiple Virtual Servers can
	be setup in local network.
	VPN passthrough
	NetMeeting, MSN Messenger, FTP, Quick Time,
	mIRC, Real Player, CuSeeMe, online gaming.
Security	PAP, CHAP, and MS-CHAP/CHAP2 for
	PPP authentication
	Firewall based on incoming & outgoing ltering
	of IP address/Port number/Protocol type
	Ping blocking from WAN
	DMZ hosting
Hardware Interface	One RJ-11 port for ADSL connection
	One RJ-11 port (FXO port) for connecting to
	PSTN line
	Two RJ-11 ports (FXS ports) for VOIP phone calls
	Four Ethernet ports for IEEE 802.3/802.3u 10/100
	Base-T auto-sensing and auto-crossover
	One hidden button for restoring factory
	default settings
Chipset	Broadcom BCM6348 single-chip ADSL2+ with
	integrated MIPS32 CPU, transceiver & Analog
	Front End
	Broadcom BCM4318 single-chip 802.11g wireless
	LAN solution
Power Requirement and Operation Environment Requirement	Power Adaptor: Output 12 VAC, 1.5A
	Power Consumption: less than 15 W
	Ambient Temperature: 0 to 40°C
	Relative Humidity: 20% to 90% (non-condensing)
Wireless LAN	Supports IEEE 802.11g and 802.11b
	Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for
	802.11g and 11, 5.5, 2, 1 Mbps for 802.11b
	Diversity antenna system: one external antenna and
	one internal antenna
	Maximum RF output power: 13.5dBm for 802.11g
	Coverage Area:
	802.11g: LOS (Outdoors): Max. 50 meters;
	Indoors: Max. 20 meters
	802.11b: LOS (Outdoors): Max. 180 meters;
	Indoors: Max. 60 meters
	Support WEP (Wired Equivalent Privacy) RC4 with
	64-bit or 128-bit key length
	Support Access Control List, only registered WLAN
	clients are allowed
	Support 802.1x, WPA-PSK, WPA, WPA2 & Mixed
	WAP/WPA2.
Regulatory Approval and Compliance	ACA
Regulatory Approval and Compliance	Telecom New Zealand PTC270